Gloss Finish – Instant Wax Drying Aid

Gloss Finish – Instant Wax Drying Aid is the final step that helps dissipate any remaining foam and water on the vehicle. This step clears out the vehicles crevices and removes any left behind soap and help prevent unsightly spotting caused by hard water.

Gloss Finish – Instant wax Drying Aid is a specially developed water sequestering agent makes water literally sheet off the vehicle to aid with drying. The high performance wax element provides a barrier to help make cleaning easier and quicker the next time round.

In summary the Gloss Finish – Instant wax Drying Aid from West Country provides a very high standard of vehicle cleanliness that is available to all pressure washer users without the need for special equipment or techniques. It is designed for the fast and efficient cleaning of both private vehicles and fleet operators and cuts down on chemical useage and wasteage, saving time and money.

A WAX RINSE FOR AN ENHANCED DEEP GLOSSY SHINE
HYDROPHOBIC INSTANT WAX DRYING AID
ADDED BODYWORK PROTECTION
LEAVES A STREAK FREE FINISH

Dilution Rate:

Gloss finish is supplied as a concentrate and should be diluted as below:
Pressure Washer: Set the detergent control to give a 1:200 TO 1:400 dilution as required
Foam Bottle: 1:10 -1:20 dilution as required

Directions for Use:

Apply the solution evenly onto vehicle working upwards
After a few minutes, rinse off with clean high pressure water.
Do not apply to a hot vehicle or in direct sunlight or allow to dry out on the vehicle.